je suis a la recherche d'avis sur les ensembles BL Crawler de chez Redflag RC.
Est ce que quelqu'un en a déjà eu un?
les données:
eZRun 25A brushless ESC, Waterproof and dustproof
540 size, High torque brushless motor
fit 1/10 crawler, see my other list for 1/8 heavy duty crawler
--------------------------------------------------------------------------------
Key Features & Specs:
Brushless ESC (speed control):
Features:
eZRun 25A fully Programmable brushless ESC with Cooling Fan
Specially designed for RC Car & Truck, Waterproof and dustproof.
Excellent start-up, acceleration and linearity features.
Top quality electronic components to enhance the current endurance ability of the ESC.
2 running modes (Racing mode and Forward/Backward mode)
Low voltage cut-off protection, Over-heat protection
Throttle signal loss protection, Motor blocked protection.
4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment,
8 steps drag-brake force adjustment, 4 steps of initial brake force adjustment.
4 start modes from soft to very aggressive.
8 steps of timing adjustment.
Easy to program with SET button (build in ESC) or with program card (optional parts, purchase separately)
Specs:
Output: Continuous current 25A, burst current 90A
Input: 4-9 cells NiMh/NiCd or 2-3 cells LiPo
BEC Output: 6V/1.5A
Resistance: 0.005 Ohm.
Motor Supported: Sensorless Brushless Motor
Dimensions: 31.5mm(L) * 27.5mm(W) * 24mm(H).
Weight:30g (Without wires)
Brushless motor Specs:
Construction: Sensorless, Outrunner, 12 magnetic pole
540 motor size, Precision Ball Bearings
890KV, recommend work with 25-35A brushless ESC
Work with 6-14 cell NI-MH or 2-5 cell Li-Po pack
Diameter: 35.8 mm
Length: 50 mm
Weight: 170g
Shaft diameter: 3.175 mm (1/8")
Shaft Length: 16 mm
--------------------------------------------------------------------------------
Package included:
1 890 KV brushless motor with 3 pair 3.5mm bullet connecters
1 Hobbywing eZRun 25A brushless ESC
User Manual
